What we do?
Domestic or Industrial Air Conditioning
Air conditioning is the cooling of indoor air for thermal comfort. In a broader sense, the term can refer to any form of cooling, heating, ventilation, or disinfection that modifies the condition of air. An air conditioner (often referred to as AC or air con.) is an appliance, system, or machine designed to stabilize the air temperature and humidity within an area (used for cooling as well as heating depending on the air properties at a given time), typically using a refrigeration cycle but sometimes using evaporation, commonly for comfort cooling in buildings and motor vehicles.
Air conditioning engineers broadly divide air conditioning applications into comfort and process. Comfort applications aim to provide a building indoor environment that remains relatively constant in a range preferred by humans despite changes in external weather conditions or in internal heat loads. Air conditioning makes deep plan buildings feasible, for otherwise they’d have to be built narrower or with light wells so that inner spaces receive sufficient outdoor air via natural ventilation. Air conditioning also allows buildings to be taller since wind speed increases significantly with altitude making natural ventilation impractical for very tall buildings. Comfort applications for various building types are quite different and may be categorized as Low-Rise Residential buildings, including single family houses, duplexes, and small apartment buildings High-Rise Residential buildings, such as tall dormitories and apartment blocks Commercial buildings, which are built for commerce, including offices, malls, shopping centers, restaurants, etc. Institutional buildings, which includes hospitals, governmental, academic, and so on. Industrial spaces where thermal comfort of workers is desired. In addition to buildings, air conditioning can be used for many types of transportation — motor-cars and other land vehicles, trains, ships, aircraft, and spacecraft. Process applications aim to provide a suitable environment for a process being carried out, regardless of internal heat and humidity loads and external weather conditions. Although often in the comfort range, it is the needs of the process that determine conditions, not human preference. Process applications include these: Hospital operating theaters, in which air is filtered to high levels to reduce infection risk and the humidity controlled to limit patient dehydration. Although temperatures are often in the comfort range, some specialist procedures such as open heart surgery require low temperatures (about 18 °C, 64 °F) and others such as neonatal relatively high temperatures (about 28 °C, 82 °F). Clean rooms for the production of integrated circuits, pharmaceuticals, and the like, in which very high levels of air cleanliness and control of temperature and humidity are required for the success of the process. Facilities for breeding laboratory animals. Since many animals normally only reproduce in spring, holding them in rooms at which conditions mirror spring all year can cause them to reproduce year-round. Aircraft air conditioning. Although nominally aimed at providing comfort for passengers and cooling of equipment, aircraft air conditioning presents a special challenge because of the changing density associated with changes in altitude, humidity and temperature of the outside air.
Refrigeration air conditioning equipment usually reduces the humidity of the air processed by the system. The relatively cold (below the dew point) evaporator coil condenses water vapor from the processed air, (much like an ice-cold drink will condense water on the outside of a glass), sending the water to a drain and removing water vapor from the cooled space and lowering the relative humidity. Since humans perspire to provide natural cooling by the evaporation of perspiration from the skin, drier air (up to a point) improves the comfort provided. The comfort air conditioner is designed to create a 40% to 60% relative humidity in the occupied space. In food retailing establishments, large open chiller cabinets act as highly effective air dehumidifying units. A specific type of air conditioner that is used only for dehumidifying is called a dehumidifier. A dehumidifier is different from a regular air conditioner in that both the evaporator and condenser coils are placed in the same air path, and the entire unit is placed in the environment that is intended to be conditioned (in this case dehumidified), rather than requiring the condenser coil to be outdoors. Having the condensers coil in the same air path as the evaporator coil produces warm, dehumidified air. The evaporator (cold) coil is placed first in the air path, dehumidifying the air exactly as a regular air conditioner does. The air next passes over the condensers coil re-warming the now dehumidified air. Note that the terms “condenser coil” and “evaporator coil” do not refer to the behavior of water in the air as it passes over each coil; instead they refer to the phases of the refrigeration cycle. Having the condenser coil in the main air path rather than in a separate, outdoor air path (as in a regular air conditioner) results in two consequences—the output air is warm rather than cold, and the unit is able to be placed anywhere in the environment to be conditioned, without a need to have the condenser outdoors. Unlike a regular air conditioner, a dehumidifier will actually heat a room just as an electric heater that draws the same amount of power (watts) as the dehumidifier. A regular air conditioner transfers energy out of the room by means of the condensor coil, which is outside the room (outdoors). This is a thermodynamic system where the room serves as the system and energy is transferred out of the system. Conversely with a dehumidifier, no energy is transferred out of the thermodynamic system (room) because the air conditioning unit (dehumidifier) is entirely inside the room. Therefore all of the power consumed by the dehumidifier is energy that is input into the thermodynamic system (the room), and remains in the room (as heat). In addition, if the condensed water has been removed from the room, the amount of heat needed to boil that water has been added to the room. This is the inverse of adding water to the room with an evaporative cooler. Dehumidifiers are commonly used in cold, damp climates to prevent mold growth indoors, especially in basements. They are also sometimes used in hot, humid climates for comfort because they reduce the humidity which causes discomfort (just as a regular air conditioner, but without cooling the room). The engineering of physical and thermodynamic properties of gas-vapor mixtures is named Psychometrics.
A poorly maintained air-conditioning system can occasionally promote the growth and spread of microorganisms, such as Legion Ella pneumophila, the infectious agent responsible for Legionnaires’ disease, or hemophilic actinomycetes, but as long as the air conditioner is kept clean these health hazards can be avoided. Conversely, air conditioning, including filtration, humidification, cooling, disinfection, etc., can be used to provide a clean, safe, hypoallergenic atmosphere in hospital operating rooms and other environments where an appropriate atmosphere is critical to patient safety and well-being. Air conditioning can have a positive effect on sufferers of allergies and asthma. In serious heat waves, air conditioning can save the lives of the elderly. Some local authorities can have or even set up public cooling centers for people without home air conditioning.
What Our Clients Says
Bonny island and Finima town projects: Tanphija company is outstanding their jobs, although I have not met them, only access their works through recommendation of colleague. We send them money and they delivered at the given time. Am sure they won't disappoint you too.Engr. Emmanuel (Project supervisor)
Grace Co Company Ltd Tanphija sounds to me like a foreign company, their services is indeed very good, although I hardly recommend, I recommend them because of their abilities to keep promises with business sense.Mr Olatunji (Managing Director) company co
Eko Hotel and Suites: Tanphija company stand out among other contractors company we have, they are professionals in their approaches and timely dedicated on delivery. I recommend them for chilling and freezer business and other interesting business in future.Engr. Sandy (General Maintenance Manager) biz inc